View TN6727A_317937.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TN6727A
TN6727A
CB
E
TO-226
PNP General Purpose Amplifier
This device is designed for general purpose medium power amplifiers and switches requiring collector currents to 1A. Sourced from Process 77. See TN6726A for characteristics.
Absolute Maximum Ratings*
Symbol VCES VCBO VEBO IC TJ, Tstg Parameter Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous
TA = 25C unless otherwise noted
Value 40 50 5 1.5 -55 to +150
Units V V V A C
Operating and Storage Junction Temperature Range
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Thermal Characteristics
Symbol
TA = 25C unless otherwise noted
Max Characteristic TN6727A PD RJC RJA Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient 1 8 50 125 W mW/C C/W C/W Units
(c) 1997 Fairchild Semiconductor Corporation
Page 1 of 2
TN6727A
PNP General Purpose Amplifier
(continued)
Electrical Characteristics
Symbol Parameter
TA = 25C unless otherwise noted
Test Conditions
Min
Max
Units
OFF CHARACTERISTICS BVCEO BVCBO BVEBO ICBO IEBO Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current IC = 10 mA IC = 1 mA IE = 1 mA VCB = 50 V VEB = 5 V 40 50 5 100 100 V V V nA nA
ON CHARACTERISTICS* hFE DC Current Gain IC = 10 mA, VCE = 1 V IC = 100 mA, VCE = 1 V IC = 1A, VCE = 1 V VCE(sat) VBE(on) Collector-Emitter Saturation Voltage Base-Emitter On Voltage IC = 1 A, IB = 100 mA IC = 1 A, VCE = 1 V 55 60 50 250 0.5 1.2 V V
SMALL SIGNAL CHARACTERISTICS Ccb hfe Output Capacitance Small Signal Current Gain VCB = 10 V, IE = 0, f = 1MHz IC = 50 mA,VCE = 10 V, f=20MHz 2.5 30 25 pF -
*Pulse Test: Pulse Width 300 s, Duty Cycle 1.0%
Page 2 of 2
TO-226AE Tape and Reel Data and Package Dimensions
TO -226AE Packaging Configuratio n: Figur e 1.0
TAPE and REEL OPTION
FSCINT Label sampl e
FAIRCHILD SEMICONDUCTOR CORPORATION LOT:
CBVK741B019
HTB:B QTY: 10000
See Fig 2 for various .0 Reeling Styles
NSID:
PN2222N
SPEC:
D/C1:
D9842
SPEC REV: QA REV:
B2
FSCINT Labe l
(FSCINT)
5 Reels per Int ermediate Box F63TNR Labe l Custom ized Labe l 375mm x 267mm x 375mm Int ermediate Box
F63TNR Label sampl e
LOT: CBVK741B019 FSID: PN222N D/C1: D9842 D/C2: QTY1: QTY2: QTY: 2000 SPEC: SPEC REV: CPN: N/F: F
Custom ized Labe l
(F63TNR)3
AMMO PACK OPTION
See Fig 3 for 2 Ammo .0 Pack Options
TO-226AE TNR/AMMO PACKING INFORMATION
Packing Reel Style A E Ammo M P Quantity 2,000 2,000 2,000 2,000 EOL code D26Z D27Z D74Z D75Z
FSCINT Labe l 327mm x 158mm x 135mm Immed iate Box Custom ized Labe l 5 Ammo box es per Int ermediate Box F63TNR Barcode Label 333mm x 231mm x 183mm Int ermediate Box
Unit weight = 0.300gm Reel weight with components = 0.868 kg Ammo weight with components = 0.880 kg Max quanti ty per intermediate box = 10,000 units
Custom ized Labe l
BULK OPTION
See Bulk Packing Informat ion table Anti-static Bubble Sheets
FSCINT Barcode Label
(TO-226AE ) BULK PACKING INFORMATION
EOL CODE J18Z J05Z NO EOL CODE DESCRIPTION TO-18 OPTION STD TO-5 OPTION STD TO-226 STANDARD STRAIGHT LEADCLIP DIMENSION NO LEAD CLIP NO LEAD CLIP NO LEADCLIP QUANTITY 1.0 K / BOX 1.0 K / BOX 1.5 K / BOX
1,500 un its per EO70 box for std o ption
114mm x 102mm x 51mm EO70 Immediate Box
5 EO70 boxes per Int ermediate Box
530mm x 130mm x 83mm Intermediate box
Customized Label
FSCINT Labe l 7,500 un its maximum per intermediate box for std opt ion
October 1999, Rev. A1
TO-226AE Tape and Reel Data and Package Dimensions, continued
TO-226AE Reeling Style Configuration: Figure 2.0
Machine Option "A" (H) Machine Option "E" (J)
Style "A", D26Z, D70Z (s/h)
Style "E", D27Z, D71Z (s/h)
TO-226AE Radial Ammo Packaging Configuration: Figure 3.0
FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM
ORDER STYLE D74Z (M)
ORDER STYLE D75Z (P)
FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM
FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP
October 1999, Rev. A1
TO-226AE Tape and Reel Data and Package Dimensions, continued
TO-226AE Tape and Reel Taping Dimension Configuration: Figur e 4.0
Hd P Pd
b Hb H1 HO d L L1 W1 S WO W2 W t
t1 P1 F1 P2 DO ITEM DESCRIPTION PO Base of Package to Lead Bend Component Height Lead Clinch Height Component B ase Height Component A lignment ( side/side ) Component A lignment ( front/back ) Component Pitch Feed Hole Pitch Hole Center to First Lead Hole Center to Component Center Lead Spread Lead Thickness Cut Lead Lengt h Taped Lead Lengt h Taped Lead Thic kness SYMBOL b Hb HO H1 Pd Hd P PO P1 P2 F1/F2 d L L1 t t1 W WO W1 W2 DO S DIMENSION 0.098 (max) 1.078 (+/- 0.050) 0.630 (+/- 0.020) 0.748 (+/- 0.020) 0.040 (max) 0.031 (max) 0.500 (+/- 0.020) 0.500 (+/- 0.008) 0.150 (+0.009, -0.010) 0.247 (+/- 0.007) 0.104 (+/- 0 .010) 0.018 (+0.002, -0.003) 0.429 (max) 0.209 (+0.051, -0.052) 0.032 (+/- 0.006) 0.021 (+/- 0.006) 0.708 (+0.020, -0.019) 0.236 (+/- 0.012) 0.035 (max) 0.360 (+/- 0.025) 0.157 (+0.008, -0.007) 0.004 (max)
User Direction of Feed
TO-226AE Reel Configuration: Figur e 5.0
Carrier Tape Thickness Carrier Tape Widt h Hold - down Tape Width Hold - down Tape position Feed Hole Position Sprocket Hole Diameter Lead Spring Out
ELECT ROSTA TIC SEN SITIVE D EVICES
Note : All dimens io ns are in in ches.
D4
D1 ITEM DESCRIPTION SYMBOL MINIMUM MAXI MUM
F63TNR Label Custom ized Label
D2
Reel Diame ter Arbor Hole Diameter (Standard) (Small Hole) Core Diameter Hub Recess Inner Diameter Hub Recess Depth Flange to Flange Inner Width W1 Hub to Hub Cent er Widt h W3 Note: All dimensions are inches
D1 D2 D2 D3 D4 W1 W2 W3
13.975 1.160 0.650 3.100 2.700 0.370 1.630
14.025 1.200 0.700 3.300 3.100 0.570 1.690 2.090
W2
D3
October 1999, Rev. A1
TO-226AE Tape and Reel Data and Package Dimensions, continued
TO-226AE (FS PKG Code 95, 99)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]
Part Weight per unit (gram): 0.300
S4.70- 4.32; S1.52- 1.02;
2 TYP S7.73- 7.10; 2 TYP
S7.87- 7.37;
S1.65- 1.27; 0.51
S0.76- 0.36;
S15.61-14.47;
S0.51- 0.36; S1.40- 1.14; S1.40- 1.14; PIN
S0.48- 0.30;
99 E B C
95 E C B
S4.45- 3.81; 1 5 TYP 1 2 3 2 3
TO-226AE (95,99)
S2.41- 2.13;
For leadformed option ordering, refer to Tape & Reel data information.
October 1999, Rev. A1
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GTOTM HiSeCTM
DISCLAIMER
ISOPLANARTM MICROWIRETM POPTM PowerTrench QFETTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8
SyncFETTM TinyLogicTM UHCTM VCXTM
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. D

▲Up To Search▲

Price & Availability of TN6727A

	To Download TN6727A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .